Black screen, no sound, lines across the picture, or an Android TV stuck in a bootloop? We diagnose the real cause on site — backlight, power board, T-Con or panel — and tell you honestly whether it is worth repairing.
Call before 2:00 PM for a guaranteed same-day doorstep diagnostic visit across Kathmandu Valley.
Quick response within 15 minutes.
From silent displays to intricate surface-mount capacitor overhauls, our technicians pinpoint the root cause on site.
A flashlight test reveals faint image silhouettes, typically blown inverter drivers or burnt-out LED backlight strings.
Common on 32–55 inch LED setsBlown internal speaker cones, a failing digital audio amplifier IC, or a motherboard DAC fault.
Same-day speaker / IC swapDistorted scan lines from loose T-Con ribbon connectors, chip-on-film bonding degradation, or timing skew.
T-Con vs glass bonding checkPortions of the screen look shadowy or flicker due to degraded LED beads or cracked optical diffuser lenses.
Full array strip overhaulDead standby light. Kathmandu voltage fluctuations frequently rupture SMPS fuses, bridge rectifiers, or filter capacitors.
In-house power board overhaulSony 2/4/6 blink patterns or Samsung thermal protect codes point to shorts on secondary voltage rails or backplane sensors.
Official manufacturer codes decoded“No signal” when connecting DishHome, NetTV, or a PlayStation. Bent pins, port displacement, or ESD controller burnout.
SMD micro-desolderingStuck on the Android logo, YouTube freezing, or Wi-Fi greyed out. Fixed by OEM firmware flashing or module replacement.
eMMC re-flash / IC upgradeThe TV ignores IR remotes or refuses to pair a Bluetooth voice remote, caused by a faulty IR eye sensor or detached ribbon.
Front sensor PCB repairBefore you spend a single rupee, it matters whether the problem sits in the replaceable circuit boards or in the glass panel itself.
Capacitors, diodes, backlight strips, and controller chips can be repaired or replaced for a fraction of a new TV’s price, with a high success rate and a 90-day warranty.
Replacement display panels often cost 70% to 90% of a brand-new television. If our technician confirms the glass is destroyed, we say so upfront and advise against wasteful spending.
Specialised precision diagnostic gear for both older sets and the latest generation.
Edge-lit and direct-lit LED backlit displays, from compact 24 inch screens up to 75 inch living room panels.
Older CCFL generation panels, ballast inverters, and high-voltage coil replacements.
Android TV, Google TV, LG webOS, Samsung Tizen, and FireOS software recovery, board upgrades, and Wi-Fi modules.
High-end quantum dot arrays, self-illuminating organic diodes, dedicated sub-power boards, and T-Con processors.
No hidden fees or unexpected post-repair extras. Written pricing before our technicians proceed.
| Service | What’s included | Starting price (NPR) |
|---|---|---|
| Inspection & doorstep diagnosis | Multimeter voltage probing, board health check, panel flashlight test, and a written repair quote. Waived if the repair goes ahead | 400 |
| Backlight strip replacement | Full set of OEM aluminium LED strips, diffuser alignment, and backlight voltage calibration. | From 2,200 |
| Power board (SMPS) repair | Capacitor and rectifier replacement, fuse renewal, and secondary rail voltage verification. | From 1,500 |
| Motherboard / T-Con repair | SoC and eMMC diagnostics, firmware re-flashing, ribbon reseating, and SMD component work. | From 1,800 |
| HDMI / USB port replacement | SMD micro-desoldering, port replacement, and ESD protection IC renewal. | From 1,200 |
Panel faults are quoted separately. If the glass itself is damaged, we show you the flashlight test result and explain why a replacement panel rarely makes financial sense.
From first call to a working picture in four straightforward steps.
Tell us the brand, screen size, and symptom. We assign the nearest electronics technician within 15 minutes.
Multimeter probing, a panel flashlight test, and blink-code decoding, all done in your living room.
We separate board faults from panel damage and quote only what is genuinely worth repairing.
Most repairs finish on site. Board-level soldering goes to our Kirtipur bench and returns within 48 hours.
We repair the failed component on the board where possible, which costs a fraction of replacing the whole assembly.
If the glass is gone, we tell you before you spend money, rather than after a part has already been ordered.
OEM-grade backlight strips and controller chips sourced through verified distributor channels.
Kathmandu voltage swings kill power boards. We check your supply and recommend protection alongside the fix.
No mystery charges. You approve parts and labour in writing before any panel comes off the wall.
If a board needs bench work, we collect the set, repair it, and reinstall it at no extra transport charge.
New Road, Baneshwor, Kirtipur, Kalanki, Maharajgunj, Chabahil, Balaju, Lazimpat, and Budhanilkantha.
Kathmandu coveragePulchowk, Jawalakhel, Jhamsikhel, Sanepa, Kupondole, Satdobato, Imadol, and Bhaisepati.
Lalitpur coverageSuryabinayak, Thimi, Sallaghari, Lokanthali, Kaushaltar, Gatthaghar, Kamalbinayak, and Byasi.
Bhaktapur coverageCall now for immediate assistance or book online in under 60 seconds. Honest panel-versus-board diagnosis and a 90-day warranty.